The full-arch implant family, planned with AI

All-on-X Dental Implants in Istanbul: One Fixed Arch on 4 to 8 AI-Planned Implants

All-on-X dental implants give you a full, fixed arch of teeth on a small group of implants, and at AIDENT Clinic in Beyoğlu, Istanbul, the number of implants is chosen from your own 3D scan. AI software measures your CBCT, and Dr. Abdurrahman Öztürk decides whether All-on-4, All-on-6 or All-on-8 suits your jaw.

4, 6 or 8 implants per archAI-assisted CBCT planningFixed, screw-retained bridgeDoctor-approved plan
Dr. Abdurrahman ÖztürkMedically reviewed by Dr. Abdurrahman Öztürk, PhD, oral & maxillofacial surgery · Last updated: 8 November 2026

Drag to rotate

The 3D model shows one jaw with several implants joined by a single fixed bridge. In All-on-X treatment, the X is the number of those implants, set after your scan is analysed.

Short answer

What are All-on-X dental implants?

All-on-X is a full-arch treatment in which a fixed bridge of teeth is screwed onto a small number of implants in one jaw, and X stands for that number, usually four to eight. At AIDENT, AI-assisted analysis of your CBCT scan helps Dr. Öztürk decide how many implants your bone can support.

What X means
Implants per arch, usually 4 to 8
Planning
3D CBCT, AI-assisted, doctor-approved
Temporary teeth
Fixed when implant stability allows
Final bridge
After healing, usually months later

Side by side

All-on-4 vs All-on-6 vs All-on-8 vs Traditional Options

General differences between the All-on-X options and traditional full-arch solutions. Your own choice depends on your scan.

Option Implants per arch Fixed or removable Bone situation it is often planned for Main consideration
All-on-4 4 (back two often tilted) Fixed Reduced bone at the back of the jaw Fewest supports; precise angle planning is essential
All-on-6 6 Fixed Enough bone for extra implants along the arch Load shared by more implants; more surgical sites
All-on-8 8 Fixed Good bone volume, larger arches or strong bite Most supports; needs the most available bone
Implant-supported overdenture Usually 2 to 4 Removable, clips onto implants Varies; can suit limited bone More stable than a denture, but taken out to clean
Conventional full denture 0 Removable Rests on the gums No surgery, but can move while eating or talking
Individual implants and crowns One per missing tooth or per short bridge Fixed Healthy bone at each site Suited to a few missing teeth, not a whole arch

General overview only. The right option for you is confirmed after a CBCT scan and clinical examination.

How Many Implants Do You Need for All-on-X?

The number of implants in All-on-X depends on how much bone you have, where it sits and how strong your bite is. There is no single right number, which is why we plan All-on-X rather than one fixed protocol.

Four implants can carry a full arch when the back two are tilted to use bone in front of the sinus or the nerve canal. A systematic review of the All-on-4 concept reported that this generally avoids grafting and sinus lifts, with no significant survival difference between tilted and straight implants, although none of its studies were randomised trials.

Six or eight implants are often considered when there is bone along the whole arch, when the bone is softer, or when a patient grinds. More supports share the load but mean more surgical sites.

Upper jaw

The sinus sits above the back teeth and bone is often softer, so the doctor checks whether four implants are enough.

Lower jaw

The nerve to the lip runs through the back of the jaw, and implant tilts keep a safe distance from it.

How AI-Assisted Planning Works for All-on-X

AI-assisted planning means software helps read your 3D scan while the dentist makes every clinical decision. At AIDENT, AI tools outline the bone, sinus floor, nerve canal and remaining roots on your CBCT; Dr. Öztürk checks these outlines and tests implant positions virtually.

A review on AI in implant dentistry describes AI image analysis as a support for diagnosis and planning, and a 2024 meta-analysis found that static computer-guided placement deviated on average around one millimetre at the entry point. Digital planning does not remove surgical risk, but it shows problems on screen first.

  • AI-assisted outlining of bone, sinus and nerve, verified by the dentist
  • Virtual testing of 4, 6 or 8 implant positions
  • Teeth designed first, with screw holes kept behind the teeth
  • A 3D-printed surgical guide where guided surgery is appropriate

Read more on AI 3D dental scanning and CBCT and AI diagnostics and treatment planning.

What Happens on Surgery Day?

On surgery day, failing teeth are removed, the implants are placed to the approved plan and multi-unit abutments are fitted so one bridge can sit on them. Local anaesthesia is used, and sedation can be discussed after a medical review.

If the implants are stable enough, a fixed temporary bridge is attached shortly afterwards; in the All-on-4 review, prostheses were attached within 48 hours in all included studies. If not, a safer temporary option protects healing. Cleveland Clinic notes that osseointegration typically takes three to nine months before the final teeth.

Acrylic or Zirconia: Which Final Bridge?

The final All-on-X bridge is usually acrylic or composite teeth on a metal frame, or a bridge made mainly of zirconia. Both are screwed on, so the dentist can remove them for maintenance.

A 2021 systematic review reported more minor complications such as tooth chipping with metal-acrylic bridges in the study it summarised, fewer overall complications with zirconia, and ongoing reports of chipping on layered zirconia. Its studies were small and varied, so no firm ranking is possible.

Acrylic hybrid on a metal frame

Lighter and easier to repair; teeth can wear or chip over time.

Zirconia bridge

Hard and stain-resistant; repairs are more complex if it chips.

See also AI fixed prosthodontics.

What Are the Risks of All-on-X?

All-on-X is surgery, so it carries real risks. The FDA lists sinus perforation, numbness from nerve damage, loosening abutment screws, poor bite function and implant looseness or loss among possible complications.

The main long-term threat is peri-implantitis, inflammation of the gum and bone around implants. A 2022 study linked it to smoking, a history of treated gum disease and lack of regular maintenance. AI planning reduces uncertainty about anatomy, but it does not change biology.

Who it suits

Who Is a Candidate for All-on-X?

  • Adults who have lost most or all teeth in the upper or lower jaw
  • People whose remaining teeth are failing and cannot be saved
  • Denture wearers who want fixed teeth instead of a loose plate
  • Non-smokers, or smokers ready to stop around surgery
  • Anyone willing to clean under a bridge daily and attend check-ups

Cleveland Clinic notes that gum disease, uncontrolled diabetes and severe bone loss can raise concern. Missing only a few teeth? Look at multiple implants and implant bridges instead.

Your treatment journey

All-on-X Step by Step (Indicative Timeline)

  1. Before you travel

    1. Online first review

    Send photos and any X-rays on WhatsApp for an honest first opinion.

  2. Day 1 (indicative)

    2. CBCT scan and AI-assisted planning

    3D scan, digital tooth design and the doctor’s choice of 4, 6 or 8 implants.

  3. Day 2 (indicative)

    3. Surgery

    Extractions where needed, implant placement and multi-unit abutments.

  4. Following days (indicative)

    4. Fixed temporary bridge

    Attached when implant stability allows, followed by bite checks before you fly.

  5. About 3 to 9 months

    5. Healing

    The bone fuses with the implants while you follow a careful diet and cleaning routine.

  6. Second visit

    6. Final bridge

    New scans, try-in and fitting of the definitive screw-retained bridge.

Clinic durations are indicative and are confirmed only after your CBCT scan.

Watch

Watch: Dental Implant Treatment in Istanbul, Step by Step

In this one-minute video, Dr. Abdurrahman Öztürk walks through implant treatment in Istanbul, from examination and 3D scan to placement and final teeth. Every All-on-X arch follows these stages.

Why AIDENT

Why Plan Your All-on-X Arch at AIDENT Clinic?

A surgeon signs off every plan

Dr. Abdurrahman Öztürk reviews each case and approves the final plan.

3D CBCT digital planning

Your arch is planned on a 3D scan, with AI tools supporting the measurements.

X chosen for you

The number of implants follows your anatomy, not a fixed package.

A plan you can see

You see the 3D plan and a simulated preview before surgery.

Central Istanbul location

The clinic is in Gümüşsuyu, Beyoğlu, close to Taksim.

Support between visits

Send questions and healing photos on WhatsApp between trips.

Dr. Abdurrahman Öztürk

Medically reviewed by

Dr. Abdurrahman Öztürk

Dr. Abdurrahman Öztürk holds a PhD in dentistry and oral and maxillofacial surgery and has more than 15 years of experience in dentistry and dental surgery. At AIDENT Clinic he personally checks every AI-segmented CBCT, decides how many implants each arch needs, and performs or supervises the treatment. The AI tools support his measurements; the clinical decisions remain his.

PhD, oral & maxillofacial surgery15+ years of experienceReviewed: 8 November 2026

Aftercare

How Do You Look After an All-on-X Bridge?

You look after an All-on-X bridge with daily cleaning underneath it and regular check-ups; the FDA calls regular cleaning very important for long-term success.

  1. Keep to a soft diet during early healing, exactly as instructed
  2. Clean under the bridge every day with a water flosser and interdental or bridge floss
  3. Stop smoking or vaping, as both can disrupt healing
  4. Wear a night guard if grinding or clenching is found
  5. Attend check-ups where the bridge can be unscrewed and cleaned
  6. Report looseness, pain, bleeding, pus or swelling promptly

Our AI implant aftercare and maintenance page explains the check-up routine in more detail.

Questions and answers

All-on-X Questions Patients Ask

What does the X in All-on-X stand for?

X is the number of implants supporting one fixed full arch, usually four to eight. All-on-4, All-on-6 and All-on-8 are all versions of All-on-X, and your number is chosen after your CBCT scan.

Is All-on-X different from All-on-4?

All-on-4 is one member of the All-on-X family. All-on-X covers any fixed full-arch bridge on a small group of implants; All-on-4 uses exactly four, with the back two usually tilted.

Is All-on-6 or All-on-8 stronger than All-on-4?

Not automatically. More implants share the load, but well-angled All-on-4 can work well in suitable bone. Six or eight are often chosen for softer bone, larger arches or heavy bite forces, and need more bone.

How does AI help plan All-on-X implants?

AI tools help outline bone, sinus and nerve on your CBCT scan and support virtual testing of implant positions. Dr. Öztürk checks every outline and makes the final decisions; the AI does not decide your treatment.

Can I get All-on-X if I have bone loss?

Often, depending on your scan. Tilted back implants are designed to use remaining bone, and a systematic review reported that grafting is generally not needed with All-on-4. Severe bone loss may call for a different plan.

Will I leave with fixed teeth after surgery?

Many patients receive a fixed temporary bridge shortly after surgery, but only when the implants are stable enough. Otherwise a safer temporary option is used, so this cannot be promised beforehand.

How many trips to Istanbul does All-on-X take?

Most patients make two trips: one for the scan, surgery and temporary teeth, and one after healing, typically three to nine months later, for the final bridge. Trip lengths are confirmed after your scan.

Which is better for the final bridge, acrylic or zirconia?

Neither suits everyone. Acrylic on a metal frame is lighter and easier to repair but can chip or wear; zirconia resists wear and staining but is harder to repair. A 2021 review found no clear winner.

How do I clean under an All-on-X bridge?

Clean under it daily with a water flosser plus interdental brushes or bridge floss, because plaque collects where the bridge meets the gum. At check-ups the dentist can unscrew the bridge for a deeper clean.

What if I am missing only one tooth?

Then you do not need All-on-X. One missing tooth is usually replaced with one implant and a crown, and a few missing teeth with an implant bridge.

No question matches your search. Ask us directly on WhatsApp.

Location

Where Is AIDENT Clinic in Istanbul?

Clinic location: Gümüşsuyu Mah., Mete Cad., Beyoğlu, Istanbul. The clinic is a short walk from Taksim Square.

Find Out Which All-on-X Option Fits Your Jaw

Send your smile photos and any X-rays on WhatsApp. Dr. Abdurrahman Öztürk’s team will review them with AI-assisted analysis and tell you honestly whether All-on-4, All-on-6, All-on-8 or another solution looks realistic, with no obligation.

Free first review of photos and X-rays. Final planning needs a CBCT scan in Istanbul.

Chat on WhatsApp